Avoiding Condensation Issues In Metal Buildings

Posted on

There are many strengths of buying a metal building, such as longevity and durability. However, the issue of condensation in metal buildings can make what seemed like a good investment into a nightmare, as the the structure is gradually eroded by collected water. Here are some ways to avoid condensation problems in a metal building for the best purchase possible. 

Hire an Experienced Metal Building Contractor

When you're looking for a great metal building contractor in your area, such as One Way Building Group, it's a good idea to get their thoughts on how the building should be erected. You can quickly see if they have the experience to get the job done well. Certain best practices need to be followed, such as using continuous insulation, often with fiberglass materials. Many experienced builders will suggest a vapor barrier to work alongside the fiberglass for maximum protection from water damage; once fiberglass gets wet, it loses many of its insulating properties. At the ends of your insulation, sealing the material with vinyl-backed tape can help to make sure no moisture can reach the fiberglass. 

Protect Your Ceiling

The ceiling can be an especially vulnerable area for preventing condensation. The warm air that floats to the surface of the building can hold more moisture than cooler air near the ground level. The roofline can be one of the cooler areas of your building, especially when the outdoor temperatures are low. This may lead to drips of water coming down from the ceiling, or moisture that sits on the surface of your ceiling. Be sure to thoroughly insulate this area with vinyl coating. Avoid putting any heat producing vents on or near the ceiling as well; anything that gives off heat should be kept near ground level because they can give off moisture vapor. Consider installing a cooling system near the ceiling to help equalize the temperatures. 

Think About Air Circulation

Keeping condensation out of your building will be an ongoing issue, and setting up a good ventilation system is key. Circulating fans can be helpful, as can setting any heaters to ventilate directly to the outdoors. A dehumidifier may also be necessary in some cases.

Condensation can cause several problems; aside from surface corrosion of your metal, it may cause the growth of mold and mildew, development of allergies in its inhabitants, and problems with insects. Taking steps like the ones above can help you to avoid these issues and protect your investment.